Camera events
Technicians set up camera events, which come from applications running on the camera. A new camera has no events: you set each one up in an application on the camera. TelluCare fetches the events from the camera and shows each one as a row in the camera's event table on the user profile.
For / Required Role: Technician
Applications
| Application | What it detects |
|---|---|
| TCAP (Tellu Camera Application) | Classified events, such as a fall or a user leaving the bed. |
| Object Analytics | A person, or any movement, inside an area or across a line. |
| Fence Guard | Movement across lines, in a set direction. |
| Video Motion Detection | Any movement inside an area. |
| Audio detection (built into the camera) | Sound in the room above a set level. See Sound. |
| Furniture detection | Furniture that has been moved. See Furniture alarm. |
β οΈ Use TCAP for all events. Only use Object Analytics, Fence Guard and Video Motion Detection on camera models that don't support TCAP: AXIS P3245-LV and AXIS M1065-L.
Add an event
- Go to Users, open the user and select the Camera supervision tab.
- On the camera's card, select Configure camera, go to Apps, and select the application. For TCAP, see TCAP below.
- Create the zone, lines or scenario.
- In TelluCare, select Refresh above the event table. The new event appears as a row.
- Add alarm handling for the event. See Alarm settings.
- Test the event. See Alarm settings.
Change a zone
For an event that is already set up:
- Go to Users, open the user and select the Camera supervision tab.
- On the camera's card, find the event and select Edit zone. The application opens on the camera.
- Change the zone, lines, scenario or sound level there, and save.
- Back in TelluCare, select Refresh above the event table.
TCAP
TCAP (Tellu Camera Application) is the application to use on all cameras that support it. You set it up once per room: draw the zones of the room, then check which events are on. An event can only be turned on when the zone it needs has been drawn.
Open TCAP
- Go to Users, open the user and select the Camera supervision tab.
- On the camera's card, select Configure camera. The camera's settings open in a new tab.
- Go to Apps. Next to Tellucare Patient Activity Monitoring, select Open.
- TCAP opens, with three columns: Bed, Room and Behavior.
Draw a zone
- Select Create next to the zone.
- Click the four corners of the zone on the video. For Floor Zone, click 3 to 8 corners in order around the floor, so that the edges don't cross, then click the first corner to close it.
- The zone is saved as soon as it is drawn.
To cancel while drawing, right-click or double-click. To change a zone, drag its corners: each change is saved at once. To remove a zone, select Delete Zone. The events that need it are turned off.
| Zone | Use |
|---|---|
| Bed | The bed. Used by the bed events. |
| Door | The door out of the room. |
| Bathroom | The bathroom door. |
| Exclusion Zone 1, Exclusion Zone 2 | Areas where movement never counts, such as a TV, a window or a mirror. |
| Safe Zone 1, Safe Zone 2 | Places where the user sits or lies down, such as a chair or a sofa. A fall is never raised there; all other events work as normal. |
| Floor Zone | The floor the user can fall on. Used by fall detection. |
Turn on events
Drawing a zone turns on the events that need it. Turn an event off or on with its switch; the change is saved at once. Adding or deleting a zone turns these events back on, so check the switches after each zone. Until the zone an event needs is drawn, its switch is greyed out.
| Event | Needs |
|---|---|
| Into Bed, Out of Bed | Bed zone |
| Out of Room | Door zone |
| In Room | Door zone or Bathroom zone |
| Into Bathroom | Bathroom zone |
| Fall Detection | No zone strictly needed, but for the most reliable results, always draw a Floor zone when using fall detection. Use Fall Sensitivity to choose how fast the camera concludes after detecting a fall risk. |
Check the setup
The Monitor and View tab shows what TCAP sees: an Event Log, the user's current position and behaviour, and the overlays Show Video Stream, Show Configured Zones, Show Person Box, Show Raw Data and Show Zone Status. Use it to check that the zones are where they should be, and that the person is detected.
After setting up TCAP
- In TelluCare, select Refresh above the event table. Each event that is on appears as a row.
- Add alarm handling for each event. See Alarm settings.
- Test in the room.
- TCAP's settings are stored on the camera. Removing alarm handling in TelluCare doesn't change TCAP.
Sound
Sound in the room is detected by the camera's built-in audio detection. You don't create it: when the camera's microphone is on, the event Audio detection appears in the camera's event table by itself.
Set the sound level
- Go to Users, open the user and select the Camera supervision tab.
- On the camera's card, find Audio detection and select Edit. The camera's Detectors page opens.
- Under Audio detection, set Sound level, from 0 to 100. Sound above the level triggers the event, so a lower level reacts to quieter sounds.
- Back in TelluCare, add alarm handling for Audio detection. See Alarm settings.
Object Analytics
Each setup is a scenario. A camera can have up to 10.
| Setting | Options |
|---|---|
| What to detect |
Human (default): detects people and ignores other movement, which prevents false alarms. It takes about two seconds to recognise a person. Any motion: detects all movement, so objects such as a moving pillow or light can trigger an alarm. |
| How to trigger |
Object in area: triggers when a person or movement is inside the area. With Human, you can also set Time in area: how long the person must stay before the alarm is raised. Line crossing: triggers when a person or movement crosses the line. |
How a person triggers a scenario
A detected person is shown with a box around them. The point of detection is at the bottom of the box, where the feet are expected to be. A line is crossed as soon as this point has passed it, even if the rest of the box hasn't. This can cause a false alarm, for example when someone stands next to the bed. Placing the camera so it looks along the bed reduces this.
Camera placement
- Distance: keep objects at least half the camera's height away from it. With the camera at 2 metres, objects should be at least 1 metre away.
- At the end of the bed: the best placement for bed events.
- At an angle to the bed: can make the person's box larger than the bed, so the scenario isn't triggered.
- Close to the bed, or where the person can be partly hidden: avoid it. The camera can lose track of the person, especially at night.
At night the camera uses infrared, and the picture has less contrast. If the camera loses track of the person, adjust the area or line so it catches the person earlier.
Test in the room
Open the video stream and check that the delay is no more than 1β2 seconds. If it is longer, lower the video resolution, and keep the format at 16:9. Ask a test person to do what the scenario should detect. The line or area is highlighted when it is triggered.
Fence Guard
Fence Guard draws a box around what moves. The alert is only sent when the whole box has passed the lines, so the lines must be long enough, and far enough from the bed or door.
| Event | How to set it up |
|---|---|
| Into bed | Place the lines low, by the bed. Let them go far enough out to the sides to catch the movement. |
| Out of bed | Same area as into bed, with the direction reversed. |
| Out of room | Cover all angles the person can reach the door from. |
| Into room | Same area as out of room, with the direction reversed. |
| Common mistake | What happens |
|---|---|
| Lines too close to the bed, or too short | The box never gets completely past the lines, so no alert is sent. |
| Only one line in front of the door | The person can walk past the end of the line. Add lines for the other angles. |
Video Motion Detection
All movement in the area triggers an alert, so choose the areas carefully.
| Event | How to set it up | Watch out for |
|---|---|---|
| Movement by the bed | Place the area around the bed. One alert covers going to bed, getting up and going to the toilet. | Objects that fall into the area, such as a pillow. |
| In or out of the room | Place the area around the door. | Standing in front of the door also triggers an alert. |
Reduce false alarms (Fence Guard and Video Motion Detection)
| Tool | What it does |
|---|---|
| Exclude area | Movement in an excluded area is ignored. |
| Short lived objects | How long something must be visible before it triggers an alarm. |
| Small objects | The size of objects to look for, so small objects or pets don't trigger an alarm. |
Good to know
- If the camera is offline, the event rows show Offline and zones can't be edited.
- The camera has no sense of depth. Something that moves between the camera and the area, such as a person walking in front of the bed, can look like movement in the area.
- The applications need some trial and error. Always test in the room after setting up or changing an event.
- Video Motion Detection can't tell a person from an object. If objects cause false alarms, use Object Analytics with Human.